Keeper workflows
Match the RO carbon prefilter to the supplier's disinfectant
Compare a chloramine request with a free-chlorine-only claim, using the current manufacturer sheet to show why the targets and test endpoints matter.
By FishyMag · Published
Original evidence-and-batch case · Not a clinical review or treatment recommendation.
Quick answer
A fictional supplier record naming chloramine is not answered by a prefilter document claiming only free-chlorine reduction. The current Pentair ChlorPlus sheet lists those claims separately with different conditions and capacities. Its figures are documentation examples, not an aquarium replacement schedule or a whole-system clearance.


Figure data and explanation
Real manufacturer documentation example: ChlorPlus 10, 310106 MR25. Capacities retain their specific targets, test endpoints and flow.
- Exact part and revision
- The inspected current sheet is revision MR25.
- Separate target claims
- The chlorine and chloramine rows differ.
- Transfer boundary
- No aquarium threshold or service interval is inferred.
A useful prefilter check matches disinfectant, exact part and claim conditions before interpreting a capacity.
Match the disinfectant name before comparing capacities
Original fictional packet R names chloramine in the supplier’s record, but its anonymous prefilter document makes only a free-chlorine claim. That does not establish chloramine performance. For a real documentation example, Pentair’s current ChlorPlus sheet separately lists chlorine taste-and-odour reduction and chloramine reduction. The inspected PDF is 310106 MR25, copyright 2025. Older search-index text for the same URL gives different figures; the current inspected revision is used here.
Keep each current claim attached to its endpoint
The real sheet’s ChlorPlus 10 row is part 255416-43. The table below preserves the stated units and conditions. These are manufacturer internal-test claims, not FishyMag measurements.
| Document or request | Target and condition | Bounded finding |
|---|---|---|
| Fictional supplier packet R | Chloramine named | Requested target established by that record |
| Fictional prefilter document | Free chlorine only | Chloramine claim not demonstrated |
| Current ChlorPlus 10 chlorine row | >100,000 gallons at 1 gpm | Separate chlorine taste/odour claim |
| Current ChlorPlus 10 chloramine row | 2,000 gallons at 0.5 gpm; 800 at 1 gpm | Flow-specific chloramine claims |
| Current sheet’s test note | 2.0 ppm free available chlorine to 1.0 ppm breakthrough; 3.0 ppm chloramine to 0.5 ppm | Different challenge and endpoint definitions |
| Transfer to a reader’s installation | Actual model and conditions not supplied | Not established by these examples |
Request the missing claim rather than substitute another disinfectant
Ask the actual cartridge manufacturer for chloramine reduction evidence naming the installed part, relevant flow, challenge conditions, endpoint and water-matrix limitations. Retain any final-output measurements separately. The sheet’s breakthrough endpoint is not an aquarium acceptance level, and its capacity is not a fixed calendar life. Do not divide a published gallon figure by guessed use to authorize a replacement interval. This comparison explains a documentation mismatch without recommending a cartridge, changing a treatment formulation verdict or claiming that the reader’s water has been cleared.
Use your own details
Match the RO carbon prefilter to the supplier's disinfectant worksheet
Download the editable text file, fill it in on your device and keep it with the relevant record. This blank worksheet records your information; it does not verify entries or approve treatment.
- Supplier’s exact disinfectant statement and date
- Actual installed cartridge and part number
- Exact target named in the cartridge claim
- Document revision and original source
- Flow, challenge concentration and breakthrough definition
- Applicable capacity claim with all conditions
- Downstream measurement and sample point
- Missing claim or applicability clarification
Put it into practice
Your checklist
- Match the supplier’s named disinfectant to the exact cartridge claim.
- Read the current original document and its test footnote.
- Keep performance capacity distinct from a replacement schedule or livestock threshold.
Sources and scope
This article distinguishes manufacturer statements from FishyMag’s own workflows and arithmetic examples. Linked formulation records retain their own evidence dates; publishing this article does not refresh those records.
AI-assisted writing and development. Not hands-on product testing or veterinary review. How we publish →
FishyMag reports what manufacturers say, quoted and linked. It does not diagnose illness or recommend a treatment, and it never infers that a product is safe from the absence of a warning — where no statement exists, it says so.
Formulations change. Always read the label on the bottle in your hand, and contact the manufacturer if your tank contains anything valuable or unusual.